Browse In-Stock Clothing & Accessories

These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

Replacement Part – Clip Compatible With: - TL-411 - TL-80 - UTLA-8 - USLA-8 - UTL-60 - UTL-30 - UTL-15

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Replacement Part – Aero Tail Light Bracket - Works For Both Headlight & Tail Lights - Great For Helmet Application - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars Compatible With: TST-70 TST-100 TST-150 TBT-50R TBT-120F

Replacement Part – TST Tail Light Saddle Rail Mount Allows mounting of tail light direct to saddle rails. Compatible With: TST-70 TST-100 TST-150 TBT-50R

Ever wish your cable was longer so that you could lock up your bike and accessories? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.

Brighten up your style, increase your visibility, and make those nighttime rides more fun with the Serfas SPK Spoke Lights! Available in FIVE fun LED light colors: White, Red, Green, Multicolored, and Blue. The SPK Spoke Light is quick and easy to mount and sure to stay safely secured while traveling across any terrain, and with built-in water resistance the SPK ensures a splash or two won't send you home in the dark. Add one, or even twenty, to your bike today and be the coolest cat on the block! - Water Resistant - Fast & Easy Installation / Removal - Solid Modes: Up To 30 Hours - Flash Modes: Fast – Up To 35 Hours / Slow – Up to 55 Hours - Weight: 20 Grams - Size: 12.8cm x 4.4cm - Battery: 1 x Lithium CR2032

Keep your Air Tool Pro floor pump working fantastic with this replacement head and hose.

Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

• 1-Super bright LED • 2 modes (1 steady; 1 flashing) • Water resistant aluminum construction • Multi-fit QR bar/post mount • Uses 2 x CR2032 lithium batteries (included)

Replacement Part – Headlight Bracket - Fits all Serfas headlights - Long silicone strap allows endless mounting options - No tools needed - Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

Angled Presta valve adapter - Designed for disc wheel use

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.

- Extra security against theft - 5mm hex CrMo axle

An economical and stylish taillight that uses common AAA (2x) batteries. (Batteries included) TL-25 Pluto Tail Light: - 15 Micro LED Strip - Packaged w/ Aero Post Compatible Bracket - IPX4 Waterproof - AAA Battery (x2) Modes: - Solid: High (25 Lumens) 43 Hours / Low (12 Lumens) 68 Hours - Flash: High (25 Lumens) 110 Hours / Low (12 Lumens) 150 Hours / Daytime Flash (35 Lumens) 120 Hours - Runtime: Up To 150 Hours (On Low Flash) - Weight: 38 Grams w/ Bracket

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum

Ever wish your cable was longer so that you could lock up multiple bikes? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.

Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 3.68oz - Lifetime warranty

- 12mm thick braided steel cable - 4 digit re-settable combination lock - Easily fits in a backpack - Rubber-coated cable - Chain length: 5 feet

Our slickest, most simple CO2 inflator. Insert the CO2 cartridge into the inflator, and twist the cup. Presto you are ready to inflate! *This inflator works with both threaded and non-threaded 16g cartridges. - Durable CNC alloy valve head is constructed to last a lifetime - Accepts both Presta and Schrader valves automatically - Cupped inflator design keeps your hand from freezing as the CO2 canister discharges - Soft touch finish provides better grip when twisting the barrel - 55 grams

With OnGuard's Doberman Combo lock, all you need is your bike, the lock, and a number you can remember. This combination lock uses four numbers and can be reset any time. It's made from a strong steel cable covered with tough vinyl to protect both itself and your bike. The Doberman Combo is also self-coiling for easy transport.

OnGuard's Doberman is a strong self-coiling steel cable secured with OnGuard's stout X2 double-bolt lock, which resists picking, drilling, and cutting. The cable has a tough vinyl cover which protects your bike. For convenience, the Doberman comes with a mounting bracket so you can carry the lock on your bike. And you get five keys, including OnGuard's Microlight key which has a built-in light.

- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal

• 150 lumen headlight • 3 red led taillight • Battery headlight: 3 'AA' included • Battery tail light: 2 'AAA' included • Runtime headlight: 30-70 hours depending on setting • Runtime taillight: 200 hours max