Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Rims

WTB TCS Rim Tape
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
WeThePeople Logic Rims
$35.99 - $68.99
The Logic rim uses a wider 35mm profile with a thick sidewall, which makes the rim strong and resilient to sideways impacts that can happen from anything between under-rotating a flair or over-rotating a hard 360 out of a rail. - Very strong reinforced spoke hole design - Extra-thick sidewalls to resist denting under harsh conditions
Origin8 DNZ18 Rim (700c)
$37.99
Origin-8's DNZ18 is a lightweight 700 x 22c aero aluminum clincher rim. It has machined sidewalls for great braking and the spoke holes are reinforced with eyelets for durability.
Origin8 TA42
$37.99
- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g
Odyssey Quadrant Rim
$39.99
The QUADRANT uses a unique pinned junction design that allows Odyssey's lightest rim to also be their most affordable. With its offset spoke drilling, this rim is stronger than its weight suggests. The Quadrant is one of the few pinned rims that receives regular and unquestioned use by pro level riders. SPECS - 6000 series aluminum - Width: 34mm - Height: 18mm - ERD: 392mm - 36-H - 20 inches - 420 grams (14.8 oz)
Sun Ringle Envy Rim
$55.00
Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only
Spank Spoon 28 Rim (20
$59.00
Performance hoops purpose-built for kids! SPANK Industries’ SPOON 28 rims are the perfect solution to upgrade your kid’s MTB. Manufactured from light yet durable 6-series alloy, the SPOON 28 rim is a safe, strong, performance-enhancing hoop, with a moderate width that accepts most 20-inch tires. Unlike the majority of 20-inch rims on the market, SPOON 28 rims were designed specifically for junior shredders on 20-inch mountain bikes. Key Technologies: Bead Nip Tubeless: Not recommended ERD (mm++): 382 ETRTO (mm): 406x23 Discipline: Kids
Odyssey Litehouse Rim
$59.99
The Odyssey Litehouse Rim is both light and strong, with super-thick angled sidewalls to minimize the risk of damage when you hang up. The rim features a wider cross-section than normal to compliment modern tire widths. Designed as a semi-brakeless rim that can be run front or rear. When brakes are used, be sure to adjust the pads so they avoid making contact with the tire’s sidewall, as usual. Features: - Precision welded joint - 6000 series aluminum Specs: - Width: 35mm - Height: 21mm - ERD: 388mm - Weight: 475 grams (16oz)
Odyssey Aerospace Rim
$67.99
The Aerospace features an “aero” or “V-shaped” cross-section, which creates a unique structural design. Made from 6000 series aluminum, it’s both easy to manufacture, incredibly durable and allows us to create a rim that’s strong, light and affordable. Thick inner sidewalls, and a lowered center wall section provide more room when installing or removing tires, and running brakes isn’t an issue. The Aerospace uses a traditional lacing pattern, just like the HAZARD LITE, SEVEN K-A and QUADRANT. FEATURES - Precision welded joint 6000 series aluminum SPECS - Width: 34mm - Height: 23mm - ERD: 380mm - 36-hole - 450 grams (15.8oz)
Odyssey Hazard Lite Rim
$67.99 - $77.99
A long running standard, the Hazard Lite is revered because of its strength, lightweight and affordable price. Constantly imitated but never matched in quality or reliability, the Hazard Lite is used regularly by pro-level riders–even the ones that are being paid to ride something else. SPECS - 6000 series aluminum - 32mm wide - 17mm tall 36H - 20-inch version (ERD: 390mm) - 24? version (ERD: 486mm)
Origin8 AT-PRO801-UL
$69.99
- Model: AT-PRO801-UL - ISO: 559 - Width ID: 74 - Width OD: 80 - Profile: 23.5 - Wall: Sgl - Side: NMSW - Valve: PV - Weight: 1078g - ERD: 536 - Tire Compatibility: Tube Only
Origin8 Bolt Alloy MTB+ Rim 27.5-inch
$69.99
- AL6061-T6 alloy constuction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Pinned joint - ISO-Mountain certified - ISO: 584 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - ERD: 564 - Tire Compatibility: Tubeless Compatible 40mm Width: - Width ID: 35 - Width OD: 40 - Weight: 560g 45mm Width: - Width ID: 40 - Width OD: 45 - Weight: 650g 50mm Width: - Width ID: 45 - Width OD: 50 - Weight: 730g
Spank Spoon 32 Rim
$70.00
Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready
Sun Ringle MTX 39 Rim
$70.00
Product specs: - Size:24", 26" - Width:39mm - Bead width: 39mm - Inner bead width: 30mm - Section height: 27.5mm - Weight (26"): 760g - Sleeved or welded - Hole count: 32, 36
WTB Frequency Team 26-inch
$74.95
Frequency rims are renowned for their craftsmanship, durability, rigidity, and tubeless simplicity. An ETRTO-compliant inner rim profile provides standards-driven consistency while a tape and sealant system eliminates precious rotational weight. Legendary I-Beam construction and 4D Drilling further aid in lateral and torsional strength while maximizing lifespan. Usage: Cross Country, All Mountain, Gravity
WTB Frequency CX
$79.95
Cross riders fear not, your rim is supported. A robust I-Beam pillar runs right down the center of the Frequency CX’s rim cavity. They’re as svelte as they are stiff thanks to WT69 Alloy and with a true TCS profile, tubeless setup is a breeze. So go ahead, build a set and make the rest of the field jealous. Better yet, storm past and force them to keep up. Available in both 32-hole and 28-hole.
WTB Frequency Team 27.5-inch
$79.95
Frequency rims are renowned for their craftsmanship, durability, rigidity, and tubeless simplicity. An ETRTO-compliant inner rim profile provides standards-driven consistency while a tape and sealant system eliminates precious rotational weight. Legendary I-Beam construction and 4D Drilling further aid in lateral and torsional strength while maximizing lifespan. Usage: Cross Country, All Mountain, Gravity
WTB Frequency Team 29-inch
$79.95 - $84.95
Frequency rims are renowned for their craftsmanship, durability, rigidity, and tubeless simplicity. An ETRTO-compliant inner rim profile provides standards-driven consistency while a tape and sealant system eliminates precious rotational weight. Legendary I-Beam construction and 4D Drilling further aid in lateral and torsional strength while maximizing lifespan. Usage: Cross Country, All Mountain, Gravity
GSport Birdcage Rim
$79.99
Someone said a few years ago that there was nothing new left to do with BMX rims, yet since then GSport has gone on to do quite a lot of new stuff, and here’s an example of the latest. At first glance the Birdcage looks like a fairly conventional “aero” style rim, but there is more to it than that. The first clue comes from the name; birds have hollow bones to save weight whilst retaining as much strength as possible, and the Birdcage rim has a hollow bead for the same reason. The rim’s hollow bead is still big and chunky to help reduce the chances of pinch puncturing or flat spotting the rim, but by creating a tiny hollow cavity inside it GSport can also keep the weight right down. The next innovation was to adapt their cross-lacing design to the narrow inner wall of the rim. They managed to squeeze a few extra millimeters of spoke offset out of the design to help increase lateral wheel strength, and by carefully tailoring the rim’s cross-section we managed to match all the angles to the nipple so that the walls of the rim section act like the ribs inside the Ribcage rim, which helps to support the spoke nipples as much as possible. Traditionally, the greatest flaw in “aero” rims has been the valve hole. “Aero” rims position a lot of very efficiently utilized mass in the base of the rim to support the spokes and give the rim good strength, then a huge hole is drilled through it for the valve stem and a massive weak-spot is created. With the Birdcage GSport has offset the valve hole so that this section can retain its strength. A handy side-effect of this is that fitting a pump is now more convenient. Aside from these original features, GSport spent a lot of time “sweating the small stuff”. They’ve ensured that the deep center allows for easy tire removal and fitting, and they've made sure that the sidewalls, while slimmed down, are still suitable for brake use. The end result is one of their most high tech rims to date. With a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 hole - Weight: 408g / 14.4oz - Width: 34mm ERD: 383mm
GSport Rollcage Rim
$79.99
If the Ribcage is too rich for your blood, the Rollcage is its more affordable sibling. Using the same proven shape and cross-over-lacing to create a really strong wheel, but industry standard 6061-T6 alloy and no ribs drops the price considerably. While the Rollcage is the lesser expensive, it is still an excellent rim, with the same super tough sidewall and bead profile its the lightest rim we make at 450 grams. You will recognize the rims by their outer shape, but the Rollcage is actually 2mm narrower and easily identified by the groove in the middle of the inner wall. We offer rims in HARD anodized finishes rather than the decorative anodizing used by most companies. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 450g / 15.9oz - Weight (Chrome Plate): 490g / 17.3oz - Width: 34mm ERD: 389mm
Origin8 AT-PRO-80 Fatbike Rim
$79.99
• Size: 26x4.0 • Single wall construction • Non-machined sidewall • Color: Black • Drilling: 32 • ERD: 536 • Width: 80mm • Depth: 24.5 • Weight: 1,061 grams
WTB Asym 26-inch
$84.95
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High-end alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
WTB Asym TCS Rim 27.5-inch
$84.95
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
Stan's NoTubes ZTR Crest Rim (26-inch)
$85.00
Thicker walls plus extremely low weight make Stan's ZTR Crest rim a stiff, light XC race rim. The Crest uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
Stan's NoTubes ZTR Crest Rim (27.5-inch)
$88.00
Thicker walls plus extremely low weight make Stan's ZTR Crest rim a stiff, light XC race rim. The Crest uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
Stan's NoTubes ZTR Iron Cross Rim (700c)
$88.00
Stan's Iron Cross Rims are their answer to the mud and madness that is cyclocross. Stan's renowned tubeless system and Bead Seat Technology provides lower tire pressures, increases tire volume, and delivers superior cornering traction. These super low-profile, disc-only rims feature a semi-aero profile and low weight to help you sprint out of the corners and gap the pack.
WTB Asym TCS Rim 29-inch
$89.95
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
Odyssey 7KA Rim
$89.99 - $99.99
The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm
Spank Oozy Trail 295 Rim
$90.00
The OOZY Trail 295 Rim was the first Spank Industries OohBah profile rim model, with a revolutionary tubeless enhancing design, called BeadBite. The OOZY Trail 295's wide 29.5mm outer, 24.5mm inner width allows the use of a wide range of tire sizes and profiles, and intensifies wheel stiffness while increasing the tire volume, improving both comfort and traction in loose conditions. Despite its wide burly appearance, the SPANK OOZY Trail 295 is no heavy weight. At as low as 450g in, it goes head to head with many carbon rim competitors with a safer, more durable, responsible, and economic Dynamal alloy construction. SPANK's patented Oohbah rim profile with inverted tube well, creates an element of hoop strength in the lateral profile, while reinforcing the critical side wall flanges, and means wider, lighter rims which deliver the highest strength to weight ratio on the market. Smooth ramps leading to the bead seats mean tubeless inflation is a breeze with most hand or floor pumps. - Key technologies: Bead Bite, OohBah, Dynamal Alloy - Material: MGR Dynamal Alloy - Size (in.): 26" / 27.5" / 29" - Weight (g): ±450 (26") / ±470 (27.5") /± 490 (29") - Hole Count: 32H - Inner / Outer Width (mm): 24.5 / 29.5 - Valve: F/V Presta - Tubeless: tubeless ready - Finish: polish anodized, decal logos - ERD (mm++): 528 (26") / 555 (27.5") / 591 (29") - ETRTO (mm): 559x24.5 (26") / 584x24.5 (27.5") / 622x24.5 (29")
Spank Oozy Trail 345 Rim
$90.00
When traction is king, go wide! SPANK Industries has been an innovator in wide rim design for over a decade, and the OOZY Trail 345 Rim is the culmination of these efforts. Boasting a 30mm inner width, the OOZY Trail 345’s design optimizes performance with the widest range of tire shapes and sizes on the market. This wider internal width improves tire spread, effectively increasing traction, without squaring tire profiles excessively, which can lead to reduced maneuverability and cornering traction. The OOZY Trail 345 Rim combines the strength of Dynamal alloy, the stiffness of Spank’s patented Oohbah reverse-well profile, and the enhanced tubeless performance of Bead Bite anti-burp rims hooks into a lightweight, trail-tuned package. - Key technologies: Bead Bite, OohBah, Dynamal Alloy - Material: MGR Dynamal Alloy - Size (in.): 27.5" / 29" - Weight (g): ±520 (27.5") / ±540 (29") - Hole Count: 32H - Inner / Outer Width (mm): 30 / 34.5 - Valve: F/V Presta - Tubeless: tubeless ready - Finish: shotpeen anodized, laser logos - ERD (mm++): 554 (27.5") / 591 (29") - ETRTO (mm): 584x30 (27.5") / 622x30 (29") - All Technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Discipline: trail
Page 1 of 3 Next page