Tools

The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.

- 1/2" drive torque wrench (10-60Nm) - Features .5Nm adjustment increments and 72 ratcheting teeth in either direction

• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box

- Designed for precise torque and to prevent carbon fiber component damage - 1/4" drive torque wrench with chromoly ratchet head - Chrome plated chrome vanadium Hex and Torx bits (Hex: 2,2.5,3,4,5,6mm Torx: T10,T25,T30) - 100mm extension bar included

Shimano crank arm tools to install and remove for specific models.

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

The Dynaplug Pill (aka Micro Pro) is an ergonomic, compact repair tool that quickly fixes most punctures in tubeless bike tires. - Perfect for race situations, as the wheel stays on the bike - Repair plugs are compatible with UST and tubeless ready tires (both ATB and Road) - Less mess! (fix tire without dumping sealant) - Made in USA from machined solid billet AL6061 - 42g Kit includes: x1—Pill tool (dimensions: 2.25" x 0.875") x5—Brass soft nose tip repair plugs x2—Insertion tubes x1—Micro knife x1—Air stopper x1—Pipe cleaner

The Dynaplug Racer Pro improves upon the legendary Racer's original design with Twin Tube technology. This allows you to store x4 pre-loaded plugs ready to go in a single tool. Snap-on caps protect plugs from dirt and damage. When your ready to make a repair, just pop off a cap to deploy either a standard size plug (with wheel-friendly soft brass tip) or the aluminum Megaplug for mega-big punctures. If you need more plugs just unthread the Twin Tube and flip it around for more plugging action! Machined in Chico, CA from US-made billet aluminum and stainless steel, the Racer Pro weighs 26g, only 2g more than the prior generation, yet delivers twice the puncture-defeating power! What's in the box: x1—Dynaplug Racer Pro Tool x1—Megaplug plug x3—Standard Plugs x1—Standard Twin Tube x1—Standard/Megaplug Twin Tube

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Park's Professional Pedal Wrench features an angled, oversize head for maximum leverage. It has two 15mm wrenches at different angles, so you can maximize your leverage, and a long, round, vinyl-coated handle that won’t dig into your hand the way flat wrenches do. There's even a hole in the end for hanging the wrench on your toolboard.

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade

• Removes and installs all RockShox 1/2mm rear shock eyelet bushings and mounting hardware

Our first multi-tool includes all the key bits to assemble and disassemble your bike on-the-go. Includes a 15mm and 17mm swappable pedal wrench, 4, 5, 6 and 8mm hex wrenches and a 17mm socket with an integrated storage compartment. The Travel Tool is light and easy to carry, but big enough to allow you to actually tighten everything down properly. Features: - 4mm, 5mm, 6mm, and 8mm hex wrenches - 17mm deep socket - Integrated storage compartment - Pedal Wrench (15mm and 17mm spanners included) - 8-inch Full length arm for proper leverage

Origin-8's Universal Bleed kit comes with just about everything you would need to tune your hydraulic disc brakes back to perfection. It features two 20ml syringes, three tubes, two 5mm adapters, one 6mm adapter and two hose clamps. Hydraulic fluid is not included.

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Wheels Mfg™ Thread Together & FSA® MegaEvo®. Manufactured in-house by Park Tool, anodized for easy identification, and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 48–50 mm and a minor diameter of 46.4 mm, including: - FSA® MegaEvo® - Wheels Mfg™ Thread Together Note: Does not fit Hope™ BSA30

The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

G-Sport Taper Hex Spoke Kit for wheel service and repairs.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

Once you try on Park's Heavy Duty Shop Apron, there's no going back to standard aprons. The SA-3 is made from heavy 10-ounce cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools, etc. The special crossback design removes pressure from the neck for all day comfort and a nylon quick release makes the apron easy to adjust and take off. This sweet apron is a full 35-inches in length and the bottom 7-inches of the apron can be snapped up for a custom height fit. Plus, an embroidered Park Tool logo makes the apron as good looking (even when it's dirty) as it is functional.

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including: - CeramicSpeed T47/86 - Enduro T47 (30mm and DUB spindles) - Enduro BB30/30a TorqTite (30mm and DUB spindles) - Kogel T47 - SRAM T47 DUB - White Industries T47 - White Industries PF30 Thread-Together

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including Chris King ThreadFit T47 & ThreadFit 30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 12-notch bottom bracket tool fittings with a major diameter of 50–53 mm and a minor diameter of 48.2 mm, including: - BBInfinite T47 - Chris King ThreadFit T47 - Chris King ThreadFit 30 - Enduro BBRight Torqtite - Hambini T47 - Rotor T47 External 30mm - Rotor BBright, BB30, BB386EVO, and PF30 thread-together

- Professional wrenches fit internal nipples on many deep section aero rims

The Easy-Pro Brush Set includes 5 different brushes that make easy work of all bike-cleaning jobs. Use them to remove mud, dirt and road grime from your frame and components. The package comes with a features-and-benefits guide that explains the multiple uses of each brush. Also included is a chain for hanging the brushes when they're not in use.

A precision CNC-machined aluminum tool for the installation and removal of select components with 16-notch tool fittings, including bottom brackets, center lock disc brakes, and e-bike motor lockrings. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-69.4 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 16-notch tool fittings with a major diameter (outside of notches) of 44–45 mm and a minor diameter (inside of notches) of 42.7 mm, including: - Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded bottom bracket cups - Threaded bottom bracket cups from Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others - Center lock disc brake rotor lockrings - Bafang BBSH, BBS02 mid-drive motor lockrings - 3/8" drive fitting

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade - Plastic body

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Shimano Ultegra BBR60 and Deore XT MT-800 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-59.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. - Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 41–42 mm and a minor diameter (inside of notches) of 39 mm, including: - Shimano Ultegra BBR60 - Shimano Deore XT MT-800 -3/8" drive fitting

Park handles all of your screwdriver needs with their Shop Screwdriver Set that includes 3mm and 6mm regular, and #0 and #2 Phillips screwdrivers. They feature heat-treated chrome-vanadium tips and shafts for maximum durability plus dual-density grips for top control and comfort.

Classic chain breaker design with Key Chain pin adapter, and adjustable support screw.