Shop Apparel & Accessories

At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

- Patented Halo Sweat Block Seal channels Sweat away from eyes and face - Dryline fabric absorbs Sweat - one size fits all - Made in the U.S.A.

Lezyne's Classic Chain Rod is designed for heavy-duty use. Featuring a custom Lezyne chain that is easily replaced, this this tool is built to get the job done every time. The handle is made of varnished wood for strength and stylish good looks and there's an included bottle opener. Hang this beauty on your wall for all future cassette changes.

Our first multi-tool includes all the key bits to assemble and disassemble your bike on-the-go. Includes a 15mm and 17mm swappable pedal wrench, 4, 5, 6 and 8mm hex wrenches and a 17mm socket with an integrated storage compartment. The Travel Tool is light and easy to carry, but big enough to allow you to actually tighten everything down properly. Features: - 4mm, 5mm, 6mm, and 8mm hex wrenches - 17mm deep socket - Integrated storage compartment - Pedal Wrench (15mm and 17mm spanners included) - 8-inch Full length arm for proper leverage

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Park's Pin Spanners are designed for maximum usefulness and versatility at the best value. Tough high-carbon tool steel is used to ensure long life and the handles are vinyl coated for a great grip and color-coded for easy identification. The green-handled SPA-1 is used to turn the adjustable bottom-bracket cup found on most 3-piece cranksets.

Ideal for wheel truing when there’s limited access to spoke nipples such as small, high spoke count wheels or while using an anti-rotation spoke holder. The SW-9 combines two common spoke nipple sizes, 0.127-inch/3.23mm (SW-0) and 0.136-inch/3.45mm (SW-2). Forged, machined, heat-treated, plated and vinyl-dipped for years of dependable use.

The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.

Designed and built especially for singlespeed bikes, Park's SS-15 Single Speed Spanner is a durable forged-steel tool with a 15mm socket wrench for axle nuts, 15mm open-end wrench for pedals, a tire lever, and a bottle opener. It's just the right size to take along on rides and is great for wrenching in your shop too.

Shop quality, L-shaped, high-torque industrial steel hex wrenches with a ball end on the long arm and stubby short arms specifically for reaching bolt heads in tight spaces (like caliper mounting bolts, chainring bolts, etc.). Other features include chamfered tips, tight tolerances, and a handy portable tool organizer/holder. 1.5, 2, 2.5, 3, 4, 5, and 6mm hexes.

Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite hex set, the THH-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). - Carefully selected combination of Chrome Vanadium and S-2 tool steels - 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex wrenches included - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Machined, chamfered tips allow easier insertion into hex fittings - Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or over-sized hexes fast and easy - Sliding T-handle creates increased leverage and multiple access positions - Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims

The Proviz REFLECT360 Vest is the first fully reflective vest designed for cycling, running, and other outdoor uses. The Vest is designed to help you stand out at night on the roads as well as be a functional and comfortable item for you to use when out exercising. It utilizes millions of reflective beads that reflect light back to the light source, enabling you to stand out in a vehicle's headlights. The REFLECT360 Vest will keep the wind out during the colder months, yet the perforated back mesh will help the extra heat escape. About the fabric: The fabric used for the REFLECT360 range is highly technical. During daylight, it is a modest grey color. At night, when the fabric picks up an external light source, e.g. vehicle headlights, it gives "astonishing reflectivity". The material is CE EN 20471 certified. - Lightweight, highly reflective vest packed with features - 100% reflective and windproof material - Fitted shoulders ensure you stay warm in colder weather - Perforated back wicks moisture away and keeps the fabric breathable - Zippered side pockets for storing keys or other valuable - Large pull-tabs make zipping easy with or without gloves

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) -Judy Gold and Silver (2018+)

DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes

TL-EW300 Di2 Cable Tool

The Hydrogen Vent Road Socks are your feets' best friend for hot rides. The VaporRize Hydrogen yarns are the lightest-weight yarns we use, resulting in cool, calm, and collected feet. - 7" cuff height (size Medium) - Mesh knit structure in the cuff provides the highest level of breathability for even the hottest rides. - PowerBand mid-foot arch supports the foot and secures the shape and fit where the foot needs it most. - Targeted textured zone under forefoot reduces slip. - VaporRize Hydrogen yarns are extremely lightweight and soft against the skin, placing an emphasis on moisture transfer and minimizing friction. - Vented mesh toe channel helps to keep things light and airy within the shoe.

- Fabric Content: 100% Polyester - Mesh construction is paired with a woven front panel - New Era Premium snapback hat - One Size Fits All

- Hyper Green yarns are paired with unique Reflective Trims to keep you visibile to drivers 24 hours a day. - VaporRize Soft Air yarns are extremely lightweight and soft against the skin, placing an emphasis on moisture transfer and minimizing friction. - Reflective band on the cuff enhances visibility to motorists in low-light conditions. - Compression cuff adds security and comfort over the course of the entire ride. - PowerBand mid-foot arch supports the foot and secures the shape and fit where the foot needs it most. - Vented mesh toe channel helps to keep things light and airy within the shoe. - Targeted textured zone under forefoot reduces slip. - Graded cuff height.

Your feet deserve the best, and when it comes to socks, there's no better way to treat them than with a pair of our Soft Air Road Socks. They're constructed from Soft Air Vaporize yarns that transfer moisture like the best in the business. And while this leaves the foot feeling dry and cool, we took things a step further by incorporating a ventilating mesh channel around the toes. - 4" cuff height (size Medium) - Graded cuff height. - Light compressive cuff adds security and comfort over the course of your ride. - PowerBand mid-foot arch supports the foot and secures the shape and fit where the foot needs it most. - Soft Air Vaporize yarns fight odor with silver ions and move moisture to give you a dry environment that your feet will appreciate. - Targeted textured zone under forefoot reduces slip. - Vented mesh toe channel helps to keep things light and airy within the shoe.

Your feet deserve the best, and when it comes to socks, there's no better way to treat them than with a pair of our Soft Air Road Socks. They're constructed from Soft Air Vaporize yarns that transfer moisture like the best in the business. And while this leaves the foot feeling dry and cool, we took things a step further by incorporating a ventilating mesh channel around the toes. - 7" cuff height (size Medium) - Graded cuff height. - Light compressive cuff adds security and comfort over the course of your ride. - PowerBand mid-foot arch supports the foot and secures the shape and fit where the foot needs it most. - Soft Air Vaporize yarns fight odor with silver ions and move moisture to give you a dry environment that your feet will appreciate. - Targeted textured zone under forefoot reduces slip. - Vented mesh toe channel helps to keep things light and airy within the shoe.

Cold legs make for bad rides, and bad rides are no fun. Lucky for you, the RBX Comp Thermal Bib Knickers keep your legs toasty on chilly days. And to top off the comfort, we've used our Body Geometry 3D Contour Chamois with a variable density design that places support and padding where you need it, not where you don't. - Fabric Content: 70% Polyamide; 30% Elastane - Front waist construction has folded fabric band, which offers freedom of movement while riding, and rear inner soft elastic band. - Fully made of soft and stretchy Action 210 fleece.